Product Features
With regard to design, it can be an arched version as well as the traditional saddle, monopitch and shed continuous rooflights. All variants are suitable for building into in flat roofs in industrial and administrative and are also ideal for energy-efficient building refurbishment.
It fulfils the highest requirements with regard to sun, heat, sound and fire protection. Several types of vents, such us, DELTA, MONODELTA, MEGADELTA and VENTRA, can be integrated on the skylight.
Tempered Alumininum
Roofs
0-15º
Opening 140º,150º & 160º
Alumininum
RAL 9005
Tempered Glass
Polycarbonate
Specifications
Advantages
– Individually adaptable to all types of building;
– Mountable on all common roof designs;
– Aerodynamically efficient louvre-blade shape with raised edges in the middle and on the upstream side allows for continuous weatherproof ventilation. The water that accumulates in the louvres is conducted into two drainage channels on the longitudinal edge of the unit and drained off onto the roof;
– The rain-drainage channels consist of wind deflector plates, considerably improving ventilation in inflowing-wind conditions;
– To save energy during shutdown periods, the louvres (optional) can be shut by means of a locking mechanism;
– Additional nylon brushes (optional) on the locking mechanism increase the sealing effect;
– By removing the wind deflector plates, the louvres are easily accessible and can be easily cleaned;
– Due to the flat design and the resulting low windage area, the substructures on the building can be reduced to a minimum;
– Can be fitted with splitter attenuators either on or under the roof;
– Good aerodynamic efficiency;
– Powder coating allows individual choice of colours;
– Plinth mounting using tension locks – no drill holes needed (optional);
-Low maintenance due to simple and robust design.
Design Characteristics
The ENZO is made of aluminium (AlMg3) as standard. An additional locking mechanism (optionally available with sealing brushes) prevents unnecessary energy loss during shutdown periods. The locking mechanism with rollers sliding in guide rails can be controlled electrically or pneumatically. Additional splitter attenuators can be fitted in a raised base if this is necessary due to high noise levels caused by the production processes. The splitters are located underneath
the ENZO construction. The splitter frames are made of galvanized steel sheet. The absorption material is moisture-repellent and abrasion-resistant. The ventilator can be delivered with an empty housing and equipped with splitter attenuators at a later date.
Locking Mechanisms
To prevent heat loss during shutdown periods, an additional locking mechanism is necessary, which can be ordered optionally. This allows the ventilator to be closed or the air volume to be regulated. The sliding louvres are combined in groups, which are laterally supported by polyamide rollers.
For additional sealing, the locking louvres can be fitted with nylon brushes. The locking-mechanism actuator is either:
– a double-acting maintenance-free pneumatic cylinder with a bellow;
– or a low-maintenance electric motor.
Options
Custom dimensions
Powder-coated design (any RAL colour)
Bird or insect mesh
